• Satlook Micro

The SATLOOK MICRO HD is a swedish made SAT-TV instrument.

The unit is made for exact alignment and adjustment of SD and HD satellite-dishes.
The ”EasyFind”-function makes it very easy to find and maximize a specific satellite (chosen from a list).

This will help the installer to make very fast and accurate installations. The ”Easyfind” mode also recalls the last selection used when powered up.

It ´s easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to use and takes only minutes to learn.


  • Measure DVB-S and DVB-S2 signals (920-2150MHz)
  • Spectrum-analyzer with zoom function
  • EasyFind satellite identification for faster installations
  • Super bright 3” LCD display
  • Very sensitive, easy to maximize weak and strong signals
  • Digital MER, BER, QPSK (DVB-S), 8PSK (DVB-S2) and S/N-ratio
  • Readout NIT -gives Satellite ID and TV/Radio-channel info
  • X-pol. function for optimize LNB skew
  • DiSEqC according to level 1.0, 1.1 and 1.2
  • LNB voltage 13/18V, 22KHz tone switch
  • Stores up to 99 memory positions
  • RS232 for PC-connection (up/download)
  • Built in, rechargeable battery
  • Nice & small, only 1,5Kg complete with carrying case

Technical specification:

  • Input frequency: 920-2150MHz.
  • Sat-TV min level in: About 35 dBuV (noise).
  • Sat-TV max level in: About 100 dBuV.
  • Input/output impedance: 75 Ohm, F-connectors.
  • Measuring method (analog): Spectrum analyzer Signal presentation on LCD -display in form of thermometer scales.
  • Pitch-tone, highest tone on loudspeaker.
  • Measuring method (Digital): BER (bit error rate) MER (Modulation error rate) SNR (signal/noise-ratio) Constellation (QPSK & 8PSK) Max-level: Thermometer scales showing max.
  • Maxhold function. BER, MER, SNR, QPSK and 8PSK Satellite-identification: Yes, by reading out the NIT in the bitstream.
  • Info about the TV and Radio channels. Memory: Up to 99 transponders can be stored with name.
  • Memory search: The instrument scans the memory positions and presents the matching transponders.
  • Presentation: On LCD 3”
  • PC-connection: Yes, RS232-output
  • Power out: Yes, 13-18V.
  • 22 kHz tone: Yes, on/off.
  • DiSEqC: Yes, all 1.0 and 1.1. Also Toneburst on/off.
  • DiSEqC actuator: Built in positioner for DiSEqC 1.2, SatScan and SatSelect.
  • Battery: Rechargable 12v, 1.25amp/hour.
  • Accessories: Nylon carrying-case.
  • Power-supply of 230V13.5V,1.7A
  • Car-charger.
  • BNC/F-adapter.
  • perational: About 1 hour on a fully charged Battery.

Satlook Micro

  • Brand: Emitor
  • Product Code: SATLK