EOC High Speed Data over Coax - 1800Mbps LAN Only

Description

GigaBit End Point Module for EOC. – LAN Only Module.

Feeding IP signals into SAT or DVB-T systems or headends – Peer to Peer System – No controller required
Transmission freq 5…204 MHz
Net data rate 1800 Mbps (PHY)
128 bit AES encryption
2 x RJ 45 connectors
Incl. 12VDC external switching power supply
Max 16 Endpoints per network
Transmission level in coaxial network 113 dBµV ± 1dB
Maximum allowed attenuation in coaxial network 77 dB
Frequency range TV bypass 258…1800 MHz
IEEE 802.3u 100BaseT Fast Ethernet
IEEE 802.3ab 1000BaseT Gigabit Ethernet

How it works:

For Internet access in the entire network you should connect an EoC modem to the router. All other EoC modems will then have access to the Internet. The bandwidth of your internet connection will be divided when used simultaneously. The connected devices can communicate both with the Internet and with each other. You can exchange, print and play files just like in a normal Ethernet.

The types EOC 1-31 and EOC 2-31 are downward compatible to the devices of the previous generation EOC 1-11 and EOC 2-11, because they use the same return channel range from 5 to 65 MHz. With a net data rate of 720 Mbps (PHY), you can achieve a high data throughput. EOC 1-32 and EOC 2-32 use the return path range from 5 to 204 MHz and achieve a net data rate of 1800 Mbps (PHY) due to the bandwidth. However: This is only possible if in a modern CATV network the forward path frequency range of the CATV network starts at 258 MHz or if transmitters below 258 MHz can be dispensed with.

Each modem has 2 Gigabit Ethernet ports. You can connect common network devices like PC, game console or streaming box to them – or even an Ethernet switch for more connections. The modems EoC 2-31 und 2-32 are additionally equipped with WiFi. Several devices such as smartphones, tablets or notebooks can then be connected wirelessly via it. You can configure the WiFi settings in detail if required.